ВидеоКонф(ВКС)  ::   FAQ  ::   Поиск  ::   Регистрация  ::   Вход

ogg vorbis и opus

Новичком считается только что прочитавший «Астериск - будущее телефонии»
http://asterisk.ru/knowledgebase/books
и пытающийся сделать большее

Модераторы: april22, Zavr2008

ogg vorbis и opus

Сообщение maxxx.sudb » 09 сен 2019, 18:04

freepbx*CLI> module show like codec_opus.so
Module Description Use Count Status Support Level
codec_opus.so OPUS Coder/Decoder 0 Running extended
1 modules loaded


freepbx*CLI> module show like format_ogg_vorbis.so
Module Description Use Count Status Support Level
format_ogg_vorbis.so OGG/Vorbis audio 0 Running core
1 modules loaded
freepbx*CLI>


При попытке Playback:
2019-09-09 14:02:22] ERROR[14309]: format_ogg_vorbis.c:121 ogg_vorbis_open: Error opening Ogg/Vorbis file stream.
[2019-09-09 14:02:22] WARNING[14309]: file.c:473 fn_wrapper: Unable to open format ogg_vorbis


или

[2019-09-09 14:03:35] WARNING[14309]: file.c:473 fn_wrapper: Unable to open format ogg_opus

Как его уговорить читать эти файлы?
maxxx.sudb
 
Сообщений: 30
Зарегистрирован: 04 сен 2019, 11:41

Re: ogg vorbis и opus

Сообщение ded » 09 сен 2019, 18:18

*CLI> core show codecs
увидите много форматов. Но
Disclaimer: this command is for informational purposes only.
It does not indicate anything about your configuration.

Это не значит, что он умеет все их читать. И таблица трансляции об этом же скажет -
*CLI> core show translation

Audio Support
.....
Ogg Vorbis Codec(NO) Format(YES)
.....
https://wiki.asterisk.org/wiki/display/ ... pabilities

Limit the maximum playback rate of any endpoint that allow "opus" and don't include any forward error correction.
Код: выделить все
[opus]
type=opus
max_playback_rate=8000 ; Limit the bandwidth on the encoder to narrow band
fec=no ; Do not include in-band forward error correction data


Limit endpoints that allow "myopus" to wide band and use a constant bit rate:
Код: выделить все
[myopus]
type=opus
bitrate=16000 ; Maximum encoded bit rate used
cbr=yes ; The encoder will use a constant bit rate

https://wiki.asterisk.org/wiki/display/AST/Codec+Opus
ded
 
Сообщений: 15801
Зарегистрирован: 26 авг 2010, 19:00

Re: ogg vorbis и opus

Сообщение maxxx.sudb » 09 сен 2019, 18:28

Ded, как сделать кодек YES?
По ссылке сходил, понял ты прав, но зачем формат йес и кодек ноу - для меня лютая загадка.
И как исправить))?
maxxx.sudb
 
Сообщений: 30
Зарегистрирован: 04 сен 2019, 11:41

Re: ogg vorbis и opus

Сообщение ded » 09 сен 2019, 18:42

Отгадка: не все в мире кодеки поставляются вместе с Астериском.
Долгие годы так было с G.723 & G.729
Теперь примерно так же развивается ситуация.
Искать, читать, пробовать. Скорее всего ваш кодек кривой (ненастроенный, под другую платформу, нужное подчеркнуть).
Там и вторая ссылка есть.

Новомодные развития в области транскодинга - любой кодек декодируют до serial linear (slin) с заданным битрейтом, чтобы синхронизировать при записи разговоров.

*CLI> core show file formats
Format Name Extensions
slin ogg_vorbis ogg
1 file format registered.

In this state it can’t play anything other than ogg. Asterisk will still work, but will give the error on playing any audio files that aren’t ogg.

The situation can be much improved by disabling some codecs. For example, to disable speex and lpc10 do this in modules.conf:
noload => codec_speex.so
noload => codec_lpc10.so

You should see the startup time much imporved.
ded
 
Сообщений: 15801
Зарегистрирован: 26 авг 2010, 19:00

Re: ogg vorbis и opus

Сообщение maxxx.sudb » 09 сен 2019, 18:59

wget http://downloads.digium.com/pub/telepho ... _64.tar.gz>/tmp/codec_opus-16.0_current-x86_64.tar.gz
Разархивируем и закидыванием в cp *.so /usr/lib64/asterisk/modules/
Вроде эти же кодеки?

yum install asterisk16-ogg.x86_64
yum install asterisk16-opus.x86_64
Так тоже не помогает...
maxxx.sudb
 
Сообщений: 30
Зарегистрирован: 04 сен 2019, 11:41

Re: ogg vorbis и opus

Сообщение ded » 09 сен 2019, 19:08

Я не знаю.
Если инсталлированы, надо ещё и загрузить, типа
CLI> module load codec_как_он_там_называется.so
и чтобы не ругалсяпри загрузке.
ded
 
Сообщений: 15801
Зарегистрирован: 26 авг 2010, 19:00

Re: ogg vorbis и opus

Сообщение maxxx.sudb » 09 сен 2019, 20:15

Загружено уже говорит, как то так.
freepbx*CLI> module load codec_opus.so
Unable to load module codec_opus.so
Command 'module load codec_opus.so' failed.
[2019-09-09 16:12:32] WARNING[26824]: loader.c:1631 load_resource: Module 'codec_opus.so' already loaded and running.
freepbx*CLI> module load format_ogg_opus.so
Unable to load module format_ogg_opus.so
Command 'module load format_ogg_opus.so' failed.
[2019-09-09 16:13:37] WARNING[26824]: loader.c:1631 load_resource: Module 'format_ogg_opus.so' already loaded and running.

Ded спасибо за подсказку, буду искать дальше. Если найду -отпишусь, вдруг кому пригодится.
Понимаю что наверное достал, но можешь еще подсказать - мне нужно логику маршрутизации вынести из астериска наружу полностью.
Пытался через ARI - так там не нашел как работать с транком, два экстеншна соединить могу, а на транк нужный мне направить соединение с нужными параметрами не могу.
CLI - тоже не нашел
Чем копать?
Последний раз редактировалось maxxx.sudb 09 сен 2019, 20:20, всего редактировалось 1 раз.
maxxx.sudb
 
Сообщений: 30
Зарегистрирован: 04 сен 2019, 11:41

Re: ogg vorbis и opus

Сообщение ded » 09 сен 2019, 20:17

CLI> module unload....
CLI> module load ....

А у вас точно 16-й астериск?
ded
 
Сообщений: 15801
Зарегистрирован: 26 авг 2010, 19:00

Re: ogg vorbis и opus

Сообщение maxxx.sudb » 09 сен 2019, 20:22

freepbx*CLI> core show version
Asterisk 16.3.0 built by mockbuild @ jenkins7 on a x86_64 running Linux on 2019-04-17 16:33:59 UTC

Полагаю, да.
maxxx.sudb
 
Сообщений: 30
Зарегистрирован: 04 сен 2019, 11:41


Вернуться в Вопросы новичков

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 27

© 2008 — 2024 Asterisk.ru
Digium, Asterisk and AsteriskNOW are registered trademarks of Digium, Inc.
Design and development by PostMet-Netzwerk GmbH